I’m still alive! Some family emergencies and work related issues have taken me away for a while but I am slowly getting back into the swing of things. Last I left off I had sprayed the first layer of clear on my Earthshaker playfield. The next step is to repaint the areas of the playfield that are in bad shape. Before I start repainting I need to practice a bit with the airbrush.
In a previous post I mentioned that I purchased an Iwata Revolution HP-CR. I hooked it up to my compressor for the first time last night. I have installed two moisture filters onto my compressor to ensure I have dry air. I took some frisket film and masked out some simple and complex shapes on a piece of wood. I am very happy with how the airbrush works. The HP-CR is a dual action airbrush so I can adjust the volume of air and paint it sprays at the same time. My previous Badger airbrush attached to a can of air was putting out too much paint. This works much better.
Pictures are here:
